How to use AGV controlpoint simulate the working station?

Question

question

Zhun Z asked Aug 17, '23 Zhun Z commented Aug 22, '23

How to use AGV controlpoint simulate the working station?

1.fsmWhen AGV LOAD item, and travel to final destination. When AGV through the agv control point before final destination. How i let agv stop at the control point which stand for working station for process time?

Software Version:

FlexSim 22.0.16

agv

1692240781841.png (387.4 KiB)

1.fsm (107.5 KiB)

5 |100000

Attachments: Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Answer 1 · 2023-08-17T08:37:55Z

Jason Lightfoot answered Aug 17, '23 Zhun Z commented Aug 22, '23

You can use an object process flow to issue a preempting tasksequence to travel to the control point and delay onPreArrival.

AGVcontrolPointsAsStations.fsm

agvcontrolpointsasstations.fsm (42.6 KiB)

· 1

5 |100000

Attachments: Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Zhun Z commented · Aug 22, 2023 at 06:25 AM

Thanks, this is a perfect solution!

0 ·

Answer 2 · 2023-08-17T06:09:11Z

Felix Möhlmann answered Aug 17, '23 Zhun Z commented Aug 22, '23

You can define waypoint logic that gets executed when an AGV arrives at specified control points in the AGV network properties.

1-fm.fsm

1692252474088.png (20.1 KiB)

1-fm.fsm (201.1 KiB)

· 1

5 |100000

Attachments: Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Zhun Z commented · Aug 22, 2023 at 06:26 AM

Thank you!

0 ·

question